|
Toowoomba Foundry Pty Ltd is a heritage-listed foundry at 251-267 Ruthven Street, Toowoomba, Queensland, Australia. It was built from to 1940s. It is also known as Griffiths Brothers & Company, Southern Cross Works, and Toowoomba Foundry and Railway Rolling Stock Manufacturing Company. It was added to the Queensland Heritage Register on 7 July 2004. == History == The Toowoomba Foundry is located in Ruthven Street on a prominent site adjacent to the Defiance Flour Mill and the Toowoomba Railway Station. It was established in 1871 by George Washington Griffiths and has continually operated as a foundry since that time.〔 Owned by Griffiths family descendants until 1987 when it was purchased by National Consolidated, the Foundry is one of the last surviving 19th century industries on the Darling Downs. Among other products, it produced rolling stock for Queensland Railways, and the Southern Cross windmill, one of the most enduring icons on the Downs.〔 The present site of Toowoomba was initially known as the Swamp and during the 1840s was secondary to the principal Darling Downs township of Drayton.〔 European discovery of the Darling Downs occurred in 1828 when Alan Cunningham provided a route through the Great Dividing Range which separated the Downs from the Moreton Bay region. In 1840, Patrick Leslie became the first settler on the Downs, quickly followed by others and in 1842, a more accessible route through the Range was opened. Drayton evolved from a stopping place for those reaching the top of the Range, although by 1848 water shortages prompted moves to The Swamp, which was renamed Toowoomba in 1858.〔 George Washington Griffiths of Bristol, England arrived in Australia in 1870 with his wife, daughter and two sons. After attending a lecture given by J C White of Jondaryan, Griffiths decided to settle in Toowoomba where he gained work as a builder.〔 The following year, Griffith's father sent out a consignment of ironmongery, enabling him to establish a shop and repair foundry in Ruthven Street, with his brother-in-law William Atherton. In 1873, Atherton left the partnership and Griffiths was joined by his brother John who was "an engineer with several scholarships and degrees." By November of the same year, the Toowoomba Chronicle reported that the "little machine shop of Griffiths Bros. & Co" was being enlarged. (November 1873)〔 In September 1874, Griffiths sold the ironmongery business to Holberton and Company and purchased 2 acres of land on the corner of Campbell and Ruthven Streets with the intention of concentrating solely on the engineering aspects of the business. The new foundry, named Griffiths Brothers and Company, opened in February 1876 and was described in the Toowoomba Chronicle as comprising an office, storeroom and four workshops containing the sawing department, the fitting and machine shop, the casting workshop, (where the first casting in iron on the Downs was recorded) and the blacksmiths and boilermakers section. (15.2.1876)〔 In the same year, John Griffiths left the business to become Assistant Engineer in the Construction Branch of the Queensland Railway Department, although he maintained a financial interest in the Foundry.〔 The Foundry struggled during its early years, with Griffiths receiving funding from his father to cover debts. However, by 1881 the business had improved and the foundry was "making steam engines and boilers, wool and other presses, washpool requirements, spouting and soap tanks, pumps, windmills, troughing, castings - iron or brass, ironwork for verandahs, and also contracting to provide railway stock for the Queensland Government Railways." The construction of windmills, which were later to keep the company afloat during difficult times also commenced.〔 In 1883, Griffiths bought out his partners (sisters, Harriott and Lilly, brother John and brother-in-law K L Marshland) to form a public company which was floated on July 4,1884. The new company was known as the Toowoomba Foundry and Railway Rolling Stock Manufacturing Company Ltd, with Griffiths as managing director, and many notable citizens as provisional directors, including Augustus Charles Gregory, William Henry Groom and James Campbell. Despite the formation of a public company, the Griffiths family purchased sufficient shares to ensure the foundry remained under their control.〔 By 1886, the Foundry employed 72 men and comprised a showroom (60ft by 33ft) for imported goods; a foundry shop containing a central furnace, a dozen forges, steam hammers, a rolling machine and an iron cutting machine; a moulding shop; and a brass foundry. The production of windmills, which were described as "the pride and glory of the place," also continued.〔 The Foundry continued to prosper until the early 1890s, when business began to decline due to the economic depression of the period. Despite this, the Toowoomba Foundry was able to purchase the trade, plant and goodwill of its rival, the Reliance Foundry, which had been established in 1882 by Mr Porritt, former employee of Griffiths Brothers and Company. The survival of the foundry during this period is attributed to "the manufacture of cheap wood and steel Simplex windmills which were necessary on the Downs to raise water from the sub-artesian reservoirs" and were 'sold in their hundreds to farmers all over the Downs.〔 Trade increased in the late 1890s due to new rolling stock contracts. Due to the construction of new lines between 1906 and 1908, Queensland Railways found it necessary to let external contracts to private firms to build the required additional engines. Between 1909 and 1910, ninety engines were ordered from private firms including the Toowoomba Foundry, and between 1912 and 1913, the Foundry constructed an additional twenty locomotives of the light PB15 class for Queensland Railways. A further fifteen C16 class locomotives were ordered from the Foundry during 1914 -15, one of which survives as part of the Queensland Rail Museum collection at Redbank.〔 In 1903, the Southern Cross windmill was designed by Griffiths's son, George. This saw the beginning of a prosperous period due to specialisation in the windmill and water supply business, and the subsequent use of the name Southern Cross as the Foundry's trade name. In August 1924, G W Griffiths died. His sons, Alfred and George continued the management of the business, which expanded to encompass sales divisions in the Middle East and South Africa. The onset of the Second World War saw further expansion of the Foundry, with over 1000 people employed and the production of engines, generating sets and pumping units under contract to the Australian Government and the Armed Services of Britain and the United States.〔 Despite a shortage of supplies following the War, the company continued to grow, ensuring viable batch quantities were maintained by establishing the trade name through its many overseas outlets. This proved so successful that an export division was established in 1945, and additional sales offices were established in Charleville, Townsville, Rockhampton, Sydney, Melbourne, Perth, Tamworth, Moree, Lismore and South Africa.〔 The Griffiths family maintained ownership of the company until 1987 when it was purchased by National Consolidated. Due to operational changes, the Foundry site has decreased in size in recent years. The buildings at the southern end of the site, which were formerly used to assemble and package windmills, were sold to Defiance Flour Mill (who operate from the adjacent site) in 1993. The buildings at the northern end of the site are owned by Southern Cross, who now operate as a separate entity.〔 Most of the buildings on the site appear to date from the late nineteenth/early twentieth century and have been altered and extended during the two major periods of expansion in 1923 and the 1940s. More recent additions and alterations are also evident.〔 The site continues to operate as a foundry and machine shop and is currently owned by Austrim, who purchased it in 1998.〔 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Toowoomba Foundry」の詳細全文を読む スポンサード リンク
|